Are you using one of those “granny” chargers? Or concerned about overheating your electric panel?
These are valid concerns, including questions like, “How do I pay for an EV charger installation?” and “Why should you get an EV charger installed at your home or business?”
Today, let’s talk about all these things and the importance of calling the pros like Amp Electrical WA when you want to upgrade your home’s electrical system for an EV charger installation!
Fill out the form below
The Western Australian government is very concerned about the safety of its citizens, which is why it has very strict standards regarding EV chargers.
All chargers MUST be installed by a licensed electrician, and your electrical supply and load must be assessed before any work is done.
Most buildings in Perth will need a dedicated circuit, even for a home EV charger, which means that the switchboard might even need to be upgraded to handle the extra load.
This will depend on the amount of kilowatts the charger requires.
For example, a common EV charger uses about 7kW. If this is the case, you would need a 32-amp circuit breaker.
If you have a 9kW charger, you would use a 50-amp circuit breaker.
Have a professional electrician set up your EV charger installation to determine load management and which circuit breaker would work best for your vehicle. If you are outside our service area, EV charger installers in Perth can do the same work.
In most cases, no. Older homes might need an upgraded switchboard, but a complete rewiring of the home shouldn’t be necessary under normal circumstances.
The simple answer here is, ALWAYS!
If you are happy with your granny charger, then you don’t need an electrician. However, if you want fast overnight charging or need multiple EV chargers, then you want a qualified electrician to determine the correct process for your EV charger installation.
Moreover, whether you have a dedicated circuit charging station or a granny charger, if you notice unusual heat coming from the home EV charger itself or the power point, you detect a burning smell, or the power point looks scorched, unplug the electric vehicle immediately and call a licensed electrician.
This depends on the age of your home and the status of your switchboard.
Older homes may need an upgraded switchboard installed, while newer homes may only need a dedicated circuit added.
Your qualified electrician can determine the electrical standards and charger type required so that your EV charger meets Australian standards.
No, you can’t.
Australian standards require a licensed electrician to install EV chargers.
Again, if you are happy with a granny charger, you don’t need to do anything else, but most people want those easy, overnight charging units.
Legally, you cannot install an EV charger yourself, not even a single-phase connection.
These simple maintenance tips can help keep your charging unit in good condition for many years.
Keep the charging unit clean and free of dust or moisture.
Inspect the cable and charger for cracks, fraying sections, or possible heat damage.
Inspect the power point for scorching.
Check that the vent for the charger isn’t blocked or plugged with dust.
Roll up the cable and store it safely so it isn’t run over by cars or gets in the way of foot traffic.
Following these maintenance tips will keep your electric vehicle charging station and cable in good condition and cut your costs down the track.
If you’re tired of that granny charger and want a home EV charger installed, ensure compliance with Australian standards and get the rapid charging you can only dream of by using a licensed electrician.
We are always here to help. From talking about your EV’s battery capacity, to EV charger installation, or just to answer your questions, our friendly staff is here for you.
With over a decade of experience, our licensed and insured technicians will assess your home, your needs, and find a practical solution that won’t break the bank.
With free estimates, free advice, and no call-out fee, we are the best solution to all your EV charging needs.
Call Amp Electrical Perth when you are ready for a fast home EV charger!
A: Technically, yes. Nearly all EVs come with what is called a granny charger. As the name implies, this charger is EXTREMELY slow, charging at about 2kW an hour. At that speed, you can get about 10km driving range for every hour of charge. A proper EV charger is not only safer, but it also gives you a minimum of 7kW per hour. A dedicated circuit ensures that your car and home are safe.
A: Not necessarily. This will depend on the type of charger. The majority of users can charge their vehicle from home with a regular power supply. Three-phase power supply is required for super-fast charging, multiple vehicles (such as a shopping center), or for heavy-load vehicles. Call us for more info on what type of charger works best for you.
A: This varies depending on the type of charger and other important considerations, but in general, you can expect to pay between $1200 and $3000. Amp Electrical Perth will meet or exceed all EV charger installation requirements and ensure the safety of your home or business.
